MANUAL GRAFTING 3T

Thanks to its partership with a leader in this sector, Accessories for Vineyards is able to offer to its customers a huge range of products, thanks to their simple use in the field.

The great experience of its partner allow to Accessories for Vineyards to have new products for professional use or do-it-yourself!

The Manual Grafter 3T is a clamp that can perform three types of grafting : Notch graft, Omega graft and Bud graft. With a single grafting can achieve all three models of cutting as it has interchangeable blades, simply by unscrewing the two screws located on the head can be mounted to the desired blade. The types of coupling are three in order to meet various needs of plants that respond differently when they are cut, so you can operate on fruit trees, vines, kiwis, flowers etc. ...
For example, fruit trees runs the cutting Notch because these plants have little sap and only through this form of recording the sap can go up faster and allow the graft to attach to the mother plant (rooting) . The cut Omega instead is more suitable for vines, kiwi and for all those plants that once cut a lot sap flow (it is said that crying) and that for this reason they tend to push the graft out of the rootstock . Thanks to the shape of this incision is going to overcome this drawback because the terminal part of the cut is wider to go then to tighten in the neck and in this way you get a kind of piece of a puzzle that, once inserted laterally into the door coupling, will not run the risk of being pushed out of the abundant sap. The last type of graft is the Bud graft also known as "shield" that removes a side portion of the plant where there is the gem, is especially suitable for fruit trees and run mainly in the summer months.



COMPLEMENTARY MANUAL GRAFTING

The Complementary Grafter allows to effect the crown-graft on the plants until 45mm. of diameter. It is used combined, couple the Manual Grafter 3T. Both the Grafters use the same blades of cut for which rapid and sure grafts will be had.

 

The pliers is used to perform what in nature is called "plug-in crown," this mode of grafting is practiced on plants with 3-4 years of life and they obviously have a trunk size of which varies from 25 to 45mm. about to engage these plants are to be used both innestatrici.

 

Both Grafters use the same cutting blades because otherwise there would be no compatibility between the two cuts made, using the same blades will have quick couplings and safe.


 

Do not hesitate to contact us for any inquiry you may need.

We always happy to be at your service!