Automatic Monoblock - corker/ wire-hooder

Corking (champagne corks/ wine corks) + wire-hooding
With possibility of using only the corking unit

 


TECHNICAL CHARACTERISTICS
The Automatic Monoblock includes in a single machine the functions of corking and wire-hooding.
It was designed and realized to meet the needs of the small to average productions.

The machine is available in TWO VERSIONS, that differ solely due to its reduced output per hour of the bottles. The components, the mechanical mechanisms and the functioning of the machinery are not altered and have the same level of quality.

• Version from 1,200 to 2,800 bottles/h
• Version from 1,000 to 1,200 bottles/h


The machine is suitable to process glass containers with ø ranging from 55 to 115 mm and heights from 190 to 370 mm, in fact, thanks to the corking and wire-hooding turrets adjustable in height through knobs on the rear side, the machine allows processing various formats of bottles.   



Besides the Champagne cork the machine can process also wine corks (without further modifications to the corking head), depending on the customer’s needs, since it is possible to disconnect the wire-hooding turret to work only with the corking turret. This is possible by means of a mechanical disjunctor located inside the machine (see Options), that can be connected or disconnected manually.  
The parts of the machine are driven through a transmission gear controlled through a reducer and an electrical motor.  
The bottles are introduced in the machine through a mechanically operated spacing starwheel. In case of productions over 1.500bottles/hour the performance of the machine can be remarkably improved by mounting a screw unit consisting of the supports + the screw (on demand with extra price, see Options).

The bottle format change is made by substituting the central carrousel, the conveyor and the screw, if any; besides, it is necessary to substitute the bottle lifting piston and its reduction ring (at cost, see Options).  
The bottles are conveyed through a central carrousel and pistons positioning them under the corking and wire-hooding heads.
The machine needs to be fed continuously with compressed air since some devices of the corking and wire-hooding heads are operated pneumatically. The machine can be equipped with devices checking the correct position of the wire-hood and of a device controlling the bottle accumulation at the discharge (at cost, see Options).

The speed of the Monoblock can be varied with a knob on the rear side of the machine.
On demand and with extra price, (see Options), it is possible to mount an electronic variable speed drive (INVERTER) positioned on the motor, which by means of a potentiometer on the switchboard, allows more precise and sensitive speed variation. (from the minimum to the maximum throughput). The automatic corking unit is suitable for the application of natural champagne corks, both unidirectional and bidirectional types, with max. ø of 30mm. The closing system of the corking unit consists of 4 jaws of hardened and ground stainless steel with centesimal tolerances running on bronze sliders and easily demountable for cleaning and sterilization; a continuous fixed nozzle provides constant cleaning of the cork  compression and insertion drawer. The movement of the corking head is obtained through a central cam of acetal resin and cams working in axis. Unidirectional corks are fed manually in the exact position or through an orienting unit (separate machine) supplied on demand and with extra price. In case the champagne corks used were bidirectional, with an extra price (see Options) it is possible to supply the machine  with a built-in automatic feeder. Corking (champagne corks/ wine corks) + wire-hooding
With possibility of using only the corking unit


TECHNICAL CHARACTERISTICS
The Automatic Monoblock includes in a single machine the functions of corking and wire-hooding.
It was designed and realized to meet the needs of the small to average productions.

The machine is available in TWO VERSIONS, that differ solely due to its reduced output per hour of the bottles. The components, the mechanical mechanisms and the functioning of the machinery are not altered and have the same level of quality.

• Version from 1,200 to 2,800 bottles/h
• Version from 1,000 to 1,200 bottles/h

The machine is suitable to process glass containers with ø ranging from 55 to 115 mm and heights from 190 to 370 mm, in fact, thanks to the corking and wire-hooding turrets adjustable in height through knobs on the rear side, the machine allows processing various formats of bottles.  


Download
Technical form
Scheda Gabbiettatrice Automatica_CORR.pd
Documento Adobe Acrobat 526.7 KB