Kinetic, Automatic, Double effect
Valve designed to extract air from pipes, large filters, tanks or any similar equipment which must work without the presence of air.
Kinetic valve 1"& 2"
At start-up as water enters irrigation system the valve extracts air that is in the system. This stage ends as water reaches the inside of the valve raising the float and closing the main discharge outlet.
At system shutdown the valve prevents pipe collapse by allowing atmospheric air into the system to restore the inside of the system to zero pressure.
Automatic valve 2"
Same characteristics of the kinetic valve, with the difference that during system operation the valve continues to extract air from the system, allowing the income only to the arrest of the system.
Kinetic and Automatic valve 2"
It extracts the air from pipes as they fill. This stage ends as water reaches the inside of the valve raising the float and closing the main discharge outlet. It exerts continuous automatic control, eliminating any residual pocket of air
that might reach the valve, as when this happens, the float drops, partially or totally opening the discharge outlet. It prevents pipe collapse, because pressure decreasing.
ARV-1-K 1" BSP M threaded Kinetic Air / Vacum Release Valve
ARV-1-A 2" BSP M threaded Aut. Air / Vacum Release Valve
ARV-2-K 2" BSP M threaded Kinetic Air / Vacum Release Valves
ARV-2-KA 2" BSP M threaded Double effect Air Release Valves
FEEL FREE TO ASK AN ESTIMATE!