New heavy wall drip line available with Classic and Pressure Compensating emitter
Toro’s BlueLine is the new heavy wall drip line available with Classic and Pressure Compensating emitter. The innovative features of BlueLine make it the most advanced choice for both permanent and row crop applications utilizing any installation technique: above ground, below ground or hanging on a wire.
In particular, the BlueLine Classic represents the best choice to irrigate both permanent and seasonal row crops.
BlueLine Classic drip line boasts an innovative emitter design that provides superior field performance in the most extreme conditions. BlueLine Classic provides performance, durability and economy.
With unique raised inlets the amount of debris entering the emitter is dramatically reduced. Raised inlets ensure that sediment deposits at the bottom of tube do not enter the emitter thus providing the system with a superior resistance to plugging.
The unique shark tooth emitter flow path design allows uniform application of water and nutrients in demanding field applications, including long lengths of run. The State of the art injection molding technology yields an “industry best” manufacturing coefficient of variation (Cv) of less than 3% helping to ensure uniform application of fluids to all plants.
Low profile emitter design minimizes friction loss thus helping to ensure uniform application of fluid to all plants.
Available with a choice of 2 emitters:
- 2,0 l/h @ 1 bar
- 4,0 l/h @ 1 bar
Available with a choice of 2 diameters:
- 16 mm (OD) - thickness 0.9 mm
- 20 mm (OD) - thickness 0.9 mm
PHW 16 09 40 20
PHW Codification for BlueLine
16 Nominal diameter in mm
09 Wall thickness in mm (without comma)
40 Emitter spacing in cm
20 Dripper flow rate in l/hr @ 1 bar (without comma)
FEEL FREE TO ASK AN ESTIMATE!