Drip Inn


Built in emitters make Drip In the ideal dripline for quick damage-free re-rolling through dense crops like tomatoes or cottons, providing convenient storage between season, plus easy shipment and handling.


Drip In Classic is one piece jointless emitter enclosed tube. It is rugged, lightweight and very flexible. It can be laid out and re-rolled easily with no damage to in line emitters. Only the highest quality resins are used.



Highly clog resistant due to wide deep turbulent passage ways and raise inlets

Extremely accurate flow rate due to high quality control standards

Reduced labour and installation cost. No hole punching, lost emitters or handling damage

Can't separate because there are no clip-ons or connections

Lower friction loss due to jointless design, allows longer runs and fewer mainlines

Water pressure flushes dripline clean

Flow rate can be varied for crop requirements

For above and below ground applications

Emitter is factory spaced at regular intervals or by grower specification for special orders

Five years' guarantee.



Drip In Classic is highly versatile

Drippers are available with four different flow rates:

- 16mm (1,5-2,0-3,0-4,0-8,0 l/h)

- 20mm (1,5-2,0-4,0-8,0 l/h)

and it can be inserted into two hose sizes:

- 16 mm (I.D. 14 mm / O.D. 16,2 mm)

- 20 mm (I.D. 18 mm / O.D. 20,4 mm)

Unlimited spacing options, plus group spacing provide greater design flexibility

Started reel length:

- 300 m per O.D. 20 mm

- 400 m per O.D. 16 mm.