Atlas M

The manual monobloc ATLAS M consists of:

- a structure entirely made of stainless steel AISI 304 composed of a base for the support on the ground and one column on which are installed devices that allow the machine to run its production cycle;

- a device for the operation of disgorging;

- a tank for the liqueur equipped with compressed air inlet (CO2 or nitrogen) and manometer for pressure control;

- a device for bottle placement on the valve to control the flow of inbound liqueur: this device is designed to accommodate both bottle formats workable by replacing the only claim supporting the bottle;

 

- a three-way valve, with manual control, equipped with the device for adjusting the dose of liqueur into the bottles that are going to be processed. This valve is able to control both the liqueur tank with the preparation of the dose and the device of the valve that controls the flow entering the bottle;

- a device for bottle placement to be used as a tank of wine for the operation of levelling;

- a valve with a manual lever for controlling the phase of levelling.

Production is carried out with the help of an operator.


All parts that are in direct contact with the product are in stainless steel AISI 304, approved for an alimentary use.

Download
Technical form
1_Barida_DepliantAtlasM.pdf
Documento Adobe Acrobat 714.8 KB

Atlas 6-6-6

The automatic monoblocs ATLAS series are manufactured to perform the operations:

- Disgorgement or removal of the crown cap

- Addition of the liqueur (syrup)

- Levelling with wine

The 6-6-6 monobloc consist of a single station disgorging station and two turrets with a continuous rotation (each with 6 points of work) for the addition of the liqueur and levelling with wine.

 

The rotary monoblocs ATLAS series are manufactured for a completely automated working, adoptable to any production requirement, are designed to be put in a conputerized production line. Throughput from 1.500 (6-6-6 monobloc) to 2.200 (6-9-9 monobloc) bottles/hour. This throughput depends on the type of sparkling wine that is going to been worked.

All parts that are in direct contact with the product are in stainless steel AISI 304, approved for an alimentary use.

Download
Technical form
atlas 6-6.pdf
Documento Adobe Acrobat 346.0 KB

Atlas 6-9-9

The automatic monobloc ATLAS series are manufactured to perform the operations :

- Disgorgement or removal of the crown cap

- Addition of the liqueur (syrup)

- Levelling with wine

The 6-9-9 monobloc onsist of three turrets with a continuos rotation, one for each of the phase of the process: a disgorging turret with 6 working stations, a turret for addition of the liqueur and one for the levelling with wine, each of them equipped of 9 working stations.

The rotary monoblocs ATLAS series are manufactured for a completely automated working, adoptable to any production requirement, are designed to be put in a computerized production line. Throughput from 1.500 (6-6-6 monobloc) to 2.200 (6-9-9 monobloc) bottles/hour his throughput depends on the type of sparkling wine that is going been worked.

All parts that are in direct contact with the product are in stainless steel AISI 304, approved for an alimentary use.